All of these LED bulbs are designed to directly replace the original Tungsten types with the advantage of brighter instruments and side lights without the expense of extra current drain.
White LED Bayonet 15 mm 6 &12 volt
This Ba15 LED will save precious amps in pre-war cars. It will replace the majority of side light/park bulbs used from the mid 1920's. Full 360 deg angle of view and can be used in vertical or horizontal type lamps +ve or -ve ground. Available in single or double contact base
White/Amber LED Park/Indictator 6 & 12 volt
This unique LED is designed to replace the 1157 type sidelight/indicator bulb. Available as warm white or natural white light on side light and flashes Amber when turn signals are activated. +ve or-ve gnd. Available as Bay15d or ba15d base. (Full electronic Flasher relay may be needed to flash at correct rate)
Red/White Stop/tail LED Bay15 mm 6 &12 volt This LED has the brightest RED Cree currently available and features 5 SMD white LEDs for licence plate illumination. It will replace the majority of stop/tail bulbs. Full 360 deg angle of view but needs to be used in horizontal type lamps. (Full electronic Flasher relay may be needed to flash at correct rate if used as flashers) Available in +ve or-ve ground.
White LED Bayonet 15 mm 12 volt This LED Is the Ideal replacement for Interior/Dome lamps. The cool running properties of the LED will prevent fading cracking or melting of plastic lens covers. It will replace the majority single or double contact bulbs. Available as +ve or -ve ground
Amber Indicator or Stop 15 mm 6-12 volt This Ba15s LED Is the brightest currently available using the latest surface mount high heat sink Flux LEDs. It will replace the majority of indicator or stop bulbs used from the mid 1920's. Full 360 deg angle of view and can be used in vertical or horizontal type lamps. (Full electronic Flasher relay may be needed to flash at correct rate) Available as +ve and -ve ground.
Red Stop/tail LED Bayonet 15 mm 12 volt This Ba15 Is the brightest RED LED currently available using the latest surface mount high heat sink Flux LEDs. It will replace the majority of stop/tail bulbs. Full 360 deg angle of view and can be used in vertical or horizontal type lamps. (Full electronic Flasher Can may be needed to flash at correct rate if used as flashers) Available in +ve and -ve ground.
White LED Festoon. 39mm 12 volt This LED Is the brightest available and is ideal for Reversing lamps, Indicators, Stop lamps, Map and Interior lamps or as a general replacement where existing festoons are fitted. The 12 LEDs are mounted on a 20mm wide x 25mm long panel. Minimum, heat so wont melt Plastic
White LED Festoon 31 mm 12 volt This LED Is the brightest available for its size is ideal for Interior and Map Tail and number plate lamps or as a general replacement where existing festoons are fitted. The 6 LEDs are mounted on a 16mm wide panel.. Minimum heat, so wont melt Plastic lenses.
White LED Festoon 39 mm 6-12 volt This LED Is the brightest available for its size is ideal for Interior and Map Tail and number plate lamps or as a general replacement where existing festoons are fitted. The 3 LEDs are mounted on a 12mm wide panel. Minimum heat, so wont melt Plastic lenses.
White LED Festoon 39 mm 12 volt This LED Is the brightest available for its size is ideal for Interior and Map Tail and number plate lamps or as a general replacement where existing festoons are fitted. The 6 LEDs are mounted on a 16mm wide panel. Minimum heat, so wont melt Plastic lenses.